3.3: Model: Bush Hog® Professional Series

Bush Hog Professional Series Zero Turn Mowers give you an extra competitive edge - everywhere it counts. They are more comfortable for long hours, faster to save time, carry more fuel to prevent interruptions and follow ground contours to deliver a superior cut.

• Durable, easy to grease from the top spindles with heavy 1-3/16-inch shaft and durable ball bearings mounted in cast iron housings. Drop out capability makes service easy. Same spindles as featured on Professional Series.



• Heavy, reinforced decks. 49-inch deck is made of the same 10-gauge steel used for the decks of Bush Hog mowers that manicure roadsides. 55-inch and 61-inch decks are built of the same 7-gauge steel used for decks of Bush Hog heavy-duty mowers.



• 5-1/2 inch deep deck easily handles lush grass. Built of fabricated steel, it outlasts stamped decks. Rolled front edge and 3/8-inch bar across front and sides. Side bars act as wear bars.



• Fully floating deck is suspended by steel chains to allow deck to float to prevent scalping. Decks are positioned close to drive tires to maximize cut quality.



• Large, spherical anti-scalp rollers are made of durable polyethylene. Mounted on the front of the deck, they adjust with the height of the deck to avoid scalping.



• Tough, long-lasting electric clutches rated at 175 ft lbs are especially built for the rigors of commercial operations.



• Oversized discharge chute is made of maintenance-free, masticated rubber.



• Durable iron bushings assure long life of deck idler.



• Rugged Hydro-Gear® BDP10 variable displacement pumps. Motors with heavy 1-1/4-inch output shafts and 52-mm bearings deliver more power to the drive wheels for quick responsiveness and easy mowing on slopes.



• State of the art hydraulic system with fewer connections and flared fittings with O-rings eliminate time-consuming leak repairs.



• Rugged HI-LIFTTM genuine Bush Hog blades are built with the same steel as the blades used on the Bush Hog mowers that manicure roadsides. They deliver blade tip speed of 18,500 fpm.



• Choice of powerful engines. 21-hp or 25-hp Kawasaki®, 23-hp Kohler® CommandTM Pro engines provides world-famous engine reliability and exactly the horsepower you need.



• Strong, durable engine plate is made of the same 10-gauge steel used in Bush Hog roadside mowers. Hydraulic motors are mounted on reinforced 1/4-inch steel plates.



• 25-micron hydraulic system filter protects valuable pumps and motors.



• Three-year warranty is a full year longer than most competitive warranties. This bumper-to-bumper limited warranty underscores the value of Bush Hog TOUGH design and construction.



• Front axle pivots 5 degrees up and down to reduce scalping and deck wear. The Bush Hog pivoting axle also delivers a smoother ride, more traction and better control as it keeps all four wheels on the ground in undulating terrain and when climbing curbs. Bush Hog design improves cut, reduces operator fatigue and lowers machine wear and tear.



• Deck suspended from front axle to provide better contour following and immediate response to high spots. Easy to level using convenient deck slots.



• Choice of 55, 61 and 73-inch wide decks to match your job. All Professional Series decks are built of the same 7-gauge steel used for decks on Bush Hog heavy-duty mowers that maintain roadsides. Decks are fabricated and reinforced for extra strength and feature wraparound reinforcement bars on both sides and folded lip on front.



• Extra large 16 cc Hydro-Gear® pumps deliver extra ground speed and superior responsiveness to operator inputs. All the hydraulic system components are sized to provide long life. 2900 PSI relief valves protect the system against shock loads and extend system life. Large 7-inch shielded fan provides cooling.



• Choice of powerful engines. 25-hp Kawasaki® FH721V, 27-hp Kohler® CommandTM Pro, 28-hp Kohler® CommandTM Pro EFI, 30-hp Kohler® CommandTM Pro engines have world-wide reputations for reliability.



• Self-adjusting electromagnetic Warner® MagStop® clutch rated at 200 ft lbs transmits full engine torque to the spindles through Kevlar reinforced belt. Clutch meets exacting specifications for the Professional Series.



• Large 15-1/2 gal fuel capacity on 61-inch and 73-inch models. 12-1/2 gal fuel capacity on 55-inch deck models. All tanks are rugged roto-molded polyethylene and are equipped with sight lines and large fuel caps.



• Castering anti-scap rollers on 73-inch decks add to controllability and avoid scalping.



• Oversize 2-inch tall idler provides self-alignment of belt from high to low grass cutting height.



• Made for high speed transport. Frame, hydraulics and other components matched for high speed transport of 14 mph.